|
|
|
 |
|
Accessories
Scorpion Oceanics supply many items used in the termination and
handling of underwater cables, connectors and ropes. Whether it be
tooling or moulding materials or specialised components, we can
supply most products quickly and competitively.
The list includes the following:-
Polyurethane Twin packs
Mould Tools
Cable Grips
Wire Capping Resin
Hair Fairing
Battery Packs
Ropes, Thimbles and Shackles
Cable Drums & Winches etc
We are keen to work closely with customers to supply complete
cable packages including all necessary connectors, terminations,
junction boxes and handling equipment etc. However, we are equally
happy to supply components to customers wishing to undertake their
own terminations.
Mixing Instructions - Please read these instructions carefully
before opening a Twinpack.
-
Carefully remove the resin pack from outer
pack. Remove end caps if fitted.
-
Remove the centre clips separating the resin
and hardener, by holding the pack at each end and pulling
outwards gently until the clip springs off, forming one complete
bag.
-
Gripping the ends of the pack, manipulate the
resin pack vigorously with a circular motion for at least 2
minutes.
-
Place the resin pack on a smooth, flat
surface and using the centre section of the removed clip, scrape
any unmixed resin or hardener from each corner of the pack into
the centre. Manipulate the resin pack in your hands for a
further 1 minute or until uniform.
-
Cut off a small corner of the resin pack.
-
Hold the resin pack and pour into injection
cartridge or mould tool.
-
Inject into mould tool.
-
Remove termination from mould tool when
cured.
WARNING: Always wear
protective clothing.
Available in a choice of hardness's and pack
sizes
NATO Code No 8030-99-127-2809 |
|
